Display Configuration Change; Maintenance Programming Software; How To Modify Configuration Parameters - Motorola Mobile Workstation 800 Series Owner's Manual

16 MW800 Owner's Manual
Display Port
When one display is connected to the CPU, this parameter defines what CPU port the
display is connected to. Factory setting is DISPLAY 1.
BT MAC Address
Shows unique Bluetooth media access control address. This is read-only field.
Board Number
Shows internal identification of display main-board. This is read-only field.
Serial Number
Shows display serial number. This is read-only field.
NOTE: Understand that the Display configuration should be compatible with the
CPU and vice versa.
Refer to Appendix H for factory setting of the display configuration parameters.

Display Configuration Change

This chapter describes software tool and the most common method to change the
display configuration.

Maintenance Programming Software

The Maintenance Programming Software enables modification of the configuration
that starts when you turn the display on. Use the MPS context-sensitive on-line help
information for assisting in configuring the device.

How to Modify Configuration Parameters

To modify the configuration parameters perform the following:
• Double-click on the MPS icon; main MPS window appears on the screen.