5
Install the:
a
battery
b
base cover
c
micro-SD card
6
Follow the procedure in
Display assembly
Removing the display assembly
NOTE:
This process is for both touch and non-touch LCDs.
1
Follow the procedure in
2
Remove the:
a
micro-SD card
b
base cover
c
battery
d
WLAN card
e
DC-in cable
3
Remove the tape [1] and unroute the antennae cable [2] near the fan case.
4
Remove the single screw that secures the EDP bracket [3] and remove it off the EDP connector on the system board [4].
5
Disconnect the EDP cable from the system board [5].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
101