a
micro-SD card
b
base cover
c
battery
4
Follow the procedure in
Solid state drive (SSD)
Removing the SSD
1
NOTE:
This system has option to fit two form factors (M.2 2242 and M.2 2230) SSD / eMMC cards. This is achieved by
removing, inverting and, installing the extender to alternate location as marked on the palmrest.
Follow the procedure in
2
Remove the:
a
micro-SD card
b
base cover
c
battery
3
Remove the single M2xL4 screw securing the SSD on the extender [1].
4
Remove the SSD from the M.2 slot on the system board [2].
Figure 12. M.2 2230 SSD
Installing the SSD
1
Install the SSD in the M.2 bracket [1] and secure it using the single M2xL4 screw [2] securing it to the extender.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
71