NOTE:
Keyboard cable must be inserted parallel to the connector.
NOTE:
Remove the anti adhesive paper on the keyboard before inserting the cable.
NOTE:
After the cable is inserted, the operator must hold the cable with left and press the actuator down by the right
hand to avoid cable loosening.
5
Install the:
a
micro-SD card
b
base cover
c
battery
6
Follow the procedure in
Touch pad
Removing the touch pad
1
Follow the procedure in
2
Remove the:
a
micro-SD card
b
base cover
c
battery
3
Lift the actuator and disconnect the touch pad cable from the system board [1].
4
Remove the tape [2,3,4] securing the touch pad to the chassis.
82
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.