NOTE:
Follow the diagonal pattern to tighten the screws, similar to the pattern followed to loosen the screws in
"Removing
heatsink".
3
Install the:
a
battery
b
base cover
c
micro-SD card
4
Follow the procedure in
System Fan
Removing the system fan
1
Follow the procedure in
2
Remove the:
a
micro-SD card
b
base cover
c
battery
3
Unroute and pry out the WLAN antennae cable from the hook near the fan case [1].
4
Disconnect the system fan connector from the system board [2].
5
Remove the two M2xL3 screws [1] that secure the system fan to the palmrest.
6
Lift the system fan off from the palmrest [2].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
97