b
display assembly
c
DC-in cable
d
WLAN card
e
battery
f
base cover
g
micro-SD card
4
Follow the procedure in
LCD panel
Removing the LCD panel
1
Follow the procedure in
2
Remove the:
a
micro-SD card
b
base cover
c
battery
d
WLAN card
e
DC-in cable
f
display assembly
g
LCD bezel
3
Remove the four M2L3 screws [1] securing the LCD panel to the LCD back cover and flip it over to rest on the palmrest [2].
4
Peel off the tape from the EDP connector [1] and open the actuator [2] to disconnect the EDP cable from the system board [3].
5
Lift the LCD panel up and away from the computer [4].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
111