Siemens SINUMERIK 840D sl Operating Manual page 13

Procedure
MCIS DNC - Direct Numerical Control
Siemens Automation Parts
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0
1. Position the cursor on the required directory of the NC programs.
2. Press the ">>" softkey.
Additional softkeys are displayed on the vertical bar.
3. Press the "Sort" softkey.
The "Sort settings" window opens.
4. Select the desired sort criteria according to which you wish to display
the NC programs.
5. Press the "OK" softkey.
The programs are displayed and sorted according to the specified
criteria.
- OR -
Press the "Cancel" softkey if you wish to make no sorting. The window
is closed.
Overview of the program data
2.2 Sorting NC programs
13