Entering A Comment; Display Attachments - Siemens SINUMERIK 840D sl Operating Manual

Overview of the program data
2.7 File properties
2.7.2

Entering a comment

For every file saved in the DNC program system, you can enter any comment as remark.
Precondition
To enter a comment, you need the corresponding access rights.
The access rights are defined on the DNC server.
Procedure
See also
Showing properties (Page 22)
2.7.3

Display attachments

For each file to be stored in the DNC program system, additional files can be assigned as
so-called "Attachments".
You can view the files if an appropriate editor has been implemented.
Following attachments are possible:
● Text files
● PDF files
● Graphics
● SVG
24
1. Select the file.
Press the softkey "comment", in order to open the input window.
Enter a unique text.
2. Press the "OK" softkey to save the comment together with the program
data.
The comment window is closed again.
- OR -
Press the "Cancel" softkey to close the input window without saving.
MCIS DNC - Direct Numerical Control
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0