Save Filter - Siemens SINUMERIK 840D sl Operating Manual

Overview of the program data
2.5 Configuring filters
2.5.3

Save filter

You can save any individually set filter.
Save filter
Display
Filter name
Comment
Application
Procedure
18
Description
Any filter name with a maximum 40 characters.
Freely selectable text as a comment to a filter setting.
See Chapter: Entering a comment (Page 24) Enter comment
Global Filter can be used in the entire DNC system.
Local A filter can only be used on the machine for which it was
originally created.
User defined A filter can only be used by the user who created it.
1. You have selected the filter criteria and wish to save these settings.
2. Press the "Save filter" softkey.
The "Save filter" window is opened.
3. Enter the filter name into the entry field "Filter name".
You obtain a confirmation prompt if you use an existing name.
Confirm the query in order to overwrite the name.
- OR -
Cancel the action in order to change the name.
Enter the new name and optionally a comment in the entry field.
4. Press the "OK" softkey to save the filter.
- OR -
Press the "Cancel" softkey to reject the settings.
MCIS DNC - Direct Numerical Control
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0