Edit Filters - Siemens SINUMERIK 840D sl Operating Manual

2.5.4

Edit filters

You have the option of recalling already saved filter settings in order to use them for filtering
or to edit the filter settings.
Select filter
Saving the filter under a different name
Reset filter
MCIS DNC - Direct Numerical Control
Siemens Automation Parts
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0
1. The "Saved filters" window is opened.
2. In the selection box, you can display the existing filters in alphabetical
order.
3. Select the desired filter using the cursor and click the "OK" softkey.
The filter settings are displayed.
1. If you changed the settings of a filter that has been saved, then save the
filter under a different name.
Press the "Save as" softkey.
The "Save filter as" window is opened.
2. Enter the new filter name and optionally a new comment.
3. Press the "OK" softkey to confirm your entry.
The filter settings are applied and activated as a temporary filter.
1. Press the softkey "Reset filter", to reset the filter criteria that were
individually set.
If you saved the filter that was reset under the same name, then the
conditions are retained.
Overview of the program data
2.5 Configuring filters
19