Important Electrical Information - Philips ReCare 7.0 R User Manual

Important
electrical
information
Warning
• Never remove any cover without rst disconnecting AC power. If
voltage varies by 10% or more outside of speci ed range (90 to 240
V), the performance of your bike may be a ected. Such conditions
are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for
proper testing.
• Never expose this bike to rain or moisture. This product is not
designed for use outdoors, near a pool or spa, or in any other high
humidity environment.
• The recumbent bike is not protected against the ingress of water or
particulate matter.
• The recumbent bike is not suitable for use in an oxygen rich envi-
ronment.
• If not stated otherwise Philips devices are designed for operation in
normal climatic surroundings (IEC 60601-1):
- Temperature: + 10° ... + 36° C
- Relative humidity: 30 ... 90 % (non condensing)
- Air pressure: 700 ... 1060 mbar
- Maximum operating altitude: approx. 10,000 feet (3000m), with
out pressurization
- Transport and store the devices at a temperature of – 20° ...
+ 50° C.
8