Toshiba TOSVERT VF-S15 Instruction Manual page 19

Parameter setting
Title
a977  (Default)
f111 
Prior
f112 
–
setting
a973 
a974 
Step 1
a900 
a901 
Step 2
a902 
Unit 1
a903  (Default)
Step 3
a904  (Default)
Step 4
a905 
Step 1
a906 
a907 
Step 2
a908 
Unit 2
a909 
Step 3
a910 
Step 4
a911 
Step 1
a912 
a913 
Step 2
a914 
Unit 3
a915  (Default)
Step 3
a916  (Default)
Step 4
a917 
– –
a977 
NE (mismatch) command enables to combine the steps of unit 1 and 2.
If the signal of input terminal 1 and 2 don't match, forward run command is valid.
Parameter setting
Set to "Disabled" of the My function-S.
Assign the "no function" to the Terminal F.
Use the Terminal F as a simple input terminal (IX1).
Assign the "no function" to the Terminal R.
Use the Terminal R as a simple input terminal (IX1).
Assign the forward run command to the virtual input
terminal 1 (VT1).
Assign the reverse run command to the virtual input
terminal 2 (VT2).
Read IX1 (F) terminal input signal. (LD IX1)
ANDN command
NOP command (no operation)
Transfer the result to the internal terminal 1.

IX
Read IX2 (R) terminal input signal. (LD IX2)
ANDN command
OR command
Transfer the result to the virtual input terminal 1.
 
IX
Read IX1 (F) terminal input signal. (LD IX1)
AND command
NOP command (no operation)
Transfer the result to the virtual input terminal 2.

IX
Set to "My function-S always ON".
- 18 -
Description

IX  1 IX


1 IX 2 IT 1


IX  2 IX 1
  
IX 2 IX 1

 

2 IX 1 IT 1 VT 1
 

IX  1 IX 2


2 IX 1 VT 2

E6581865

2


IT 1

