System Management; 3.1 In This Chapter; 3.2 Saving Configurations - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"

3 System Management

3.1 In this Chapter

This chapter provides information about configuring basic system management
parameters.
Topics in this chapter include:
•
•
•
•

3.2 Saving Configurations

Whenever configuration changes are made, the modified configuration must be
saved so they will not be lost when the system is rebooted.
Configuration files can be saved as follows:
•
•
•
The configuration files can also be saved in a special protected database directory
using the command admin software-mngt ihub database (save-protected).
The following files are saved:
•
•
Issue: 10
3.1 In this Chapter
3.2 Saving Configurations
3.3 Configuring System Management with CLI
3.4 System Management CLI Command Reference
3.5 System Management CLI Commands
Saving Configurations
Configuring System Management with CLI
System Management CLI Command Reference
System Management CLI Commands
by executing an explicit command syntax admin save
an autonomous save occurs between 10 and 20 minutes after the last
configuration has been done on the system
as part of a general NE database backup
the configuration file
the index file, containing internal numbering used to make an identical copy of the
switch configuration after the save.
3HH-11982-AAAA-TQZZA
System Management
23