System Administration Commands; Display-Config; Enable-Tech; Table 13 Display-Config Command - Nokia 7302 Basics, Management And Oam Manual

System Management
(2 of 2)
3.5.2
3.5.2.1
Table 13
3.5.2.2
Table 14
32
Item Description
Context configure>system>
Description This command specifies the default service level ether type to be used for all v-VPLS services
if the per-service ether type is not configured.
Parameters etype — etype value (can be given in hexadecimal or decimal).
Range: hex: 0x0600...0xffff
decimal: 1536...65535
Default: 0x8100

System Administration Commands

display-config

display-config command
Item Description
Syntax display-config
Context admin
Description The current IHub configuration can be viewed by using the command.

enable-tech

enable-tech command
Item Description
Syntax [no] enable-tech
Context admin
Description This command enables the shell and kernel commands.
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10