Fragment; Icmp-Code; Table 46 Fragment Command; Table 47 Icmp-Code Command - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
(2 of 2)
4.4.2.10
Table 46
4.4.2.11
Table 47
(1 of 2)
Issue: 10
Item Description
Description This command configures a destination TCP or UDP port number for an CPU filter match
criterion.
The no form of the command removes the destination port match criterion.
Default None
Parameters port-number — The destination port number to be used as a match criteria expressed as a
decimal, hex or binary integers.
Values: 0 — 65535
mask— Mask used to specify a range of source port numbers as the match criterion.

fragment

fragment command
Item Description
Syntax [no] fragment {true | false}
Context configure>system>security>cpu-filter>ip-filter>entry>match
Description Configures fragmented or non-fragmented IP packets as an CPU filter match criterion.
The no form of the command removes the match criterion.
Default False
Parameters true — Configures a match on all fragmented IP packets. A match will occur for all packets
that have either the MF (more fragment) bit set OR have the Fragment Offset field of the IP
header set to a non-zero value.
false — Configures a match on all non-fragmented IP packets. Non-fragmented IP packets
are packets that have the MF bit set to zero and have the Fragment Offset field also set to zero.

icmp-code

icmp-code command
Item Description
Syntax [no] icmp-code icmp-code
Context configure>system>security>cpu-filter>ip-filter>entry>match
Description Configures matching on ICMP code field in the ICMP header of an IP packet as a filter match
criterion.
This option is only meaningful if the protocol match criteria specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
3HH-11982-AAAA-TQZZA
Security
57