Philips ReCare 7.0 S User Manual page 45

Step 2. Console mast & transport wheels assembly
• Install the transport wheels (77) using the 5/16" x 1-3/4" bolts (152) and
5/16" nylon nuts (193).
• Slide the console mast cover (74) onto the console mast (2); be sure
the cover orientation on the mast is correct otherwise it won't clip in
place later.
• Snake the computer cable through the console mast and slide the
mast onto the receiving brackets. Make sure the cable does not get
pinched in between the mast and bracket.
• Fasten the mast with the two 3/8" x 2-1/2" bolts (154), 3/8" split
washers (194) and 3/8" at washers (170) from the left side of the mast
and secure with the two 3/8" nylon nuts (190). Install the two 8mm x
16mm bolts (153) and curved washers (184) through the front and rear
holes in the mast.
computer cable
74
45
2
1 90 1 84
1 54
1 53
1 94
1 70
1 70
1 94
1 54
1 90
1 53 1 84
1 54
1 93
77
77
1 93
1 52
209 21 0 21 2