Virtual Private LAN Service
(2 of 2)
5.16.2.40
Table 165
5.16.2.41
Table 166
274
Item
Description
Description
This command enables and disables user to user communication for a v-VPLS service. It does
not apply to m-VPLS. When enabled, user to user traffic is permitted between users on distinct
SAPs. The user side relates to v-VPLS SAPs constructed on residential ports. User-to-user
communication for users situated on the same SAP is anyway not possible. Network side
relates to v-VPLS SAPs constructed on regular ports. Network Ports (including subtending
ISAM ports) are created in regular mode. If the port is later assigned to a sub-tending NE, the
port can be changed to residential in the port extension table, and user-to-user communication
can be enabled in the v-VPLS instance.
This parameter can be invoked at any point in time.
Default
no user-user-com
storm-control
storm-control command
Item
Description
Syntax
storm-control
no storm-control
Context
configure>service>vpls
configure>service>epipe
Description
This command enables storm-control rate limiting on a service.
Default
None
bgp
bgp command
Item
Description
Syntax
bgp
Context
configure>service>vpls
Description
This command enables the context to configure the BGP related parameters for both BGP AD
and BGP VPLS.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13