Configuring Vprn Protocols - Ospf - Nokia 7302 Manual

Virtual Private Routed Network Service
...
----------------------------------------------
*A:ALA-1>configure>service# info
For more information about the RIP protocol, refer to the ISAM Router Configuration
Guide.
7.7.6
Each VPN routing instance is isolated from any other VPN routing instance, and from
the routing used across the backbone. OSPF can be run with any VPRN,
independently of the routing protocols used in other VPRNs, or in the backbone itself.
For more information about the OSPF protocol, refer to the ISAM Router
Configuration Guide.
CLI syntax:
configure>service>vprn>ospf#
432
ecmp 2
autonomous-system 10000
route-distinguisher 10001:1
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
sap nt:sfp:1:1 create
ingress
exit
egress
exit
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-cel"
export "vprnBgpExpPolCust1"
peer-as 65101
neighbor 10.1.1.2
exit
exit
exit
rip
export "vprnRipExpPolCust1"
group "cel"
neighbor "to-ce1"
exit
exit
exit
no shutdown
exit

Configuring VPRN Protocols - OSPF

3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
scheduler-policy "SLA2"
qos 100
scheduler-policy "SLA1"
qos 1010
filter ip 6
Issue: 13