Table 215 Ccm-Ltm-Priority Command; Table 216 Low-Priority-Defect Command; Ccm-Ltm-Priority - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
5.16.4.8
Table 215
5.16.4.9
Table 216
Issue: 13

ccm-ltm-priority

ccm-ltm-priority command
Item Description
Syntax ccm-ltm-priority priority
no ccm-ltm-priority
Context configure>service>vpls>sap>eth-cfm>mep
configure>service>vpls>mesh-sdp>eth-cfm>mep
configure>service>vpls>spoke-sdp>eth-cfm>mep
configure>eth-ring>path>eth-cfm>mep
Description This command enables configuration of priority for CCM and LTM messages
Default 7
Parameters priority - Priority of the CCM/LTM Message
Value: 0...7
low-priority-defect
low-priority-defect command
Item Description
Syntax low-priority-defect { allDef | macRemErrXcon | remErrXcon | errXcon | xcon | noXcon}
Context configure>service>vpls>sap>eth-cfm>mep
configure>service>vpls>mesh-sdp>eth-cfm>mep
configure>service>vpls>spoke-sdp>eth-cfm>mep
configure>eth-ring>path>eth-cfm>mep
Description This command specifies the lowest priority defect that is allowed to generate a fault alarm.
Default macRemErrXcon
Parameters allDef - DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM and DefXconCCM
macRemErrXcon - DefMACstatus, DefRemoteCCM, DefErrorCCM and DefXconCCM
remErrXcon - DefRemoteCCM, DefErrorCCM and DefXconCCM
errXcon - DefErrorCCM and DefXconCCM
xcon - DefXconCCM
noXcon - No defects DefXcon or lower are to be reported
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
301