Siemens SINAMICS Series Function Manual page 94

Controlling the safety functions
5.4 Activating "SBC" via the Safe Brake Adapter
Table 5- 28 Terminal block X15, fast de-energization
Connection Signal
X15.1 AUX1
X15.2 AUX2
Max. connectable cross-section 2.5 mm
Spare fuse
The type of spare fuse is as follows: 2 A, time-lag.
Note
Correctly mounting the housing cover after replacing a fuse
An adhesive label is provided on the housing cover indicating the position of the connector.
Mount the cover in the correct position so that the inscription of the label matches the actual
connectors.
Mounting
The Safe Brake Adapter is designed for mounting on a rail according to EN 60715
The dimensions are shown in the following dimension drawing.
Figure 5-9
94
Description
Supply voltage: 230 VAC
Current consumption: 2 A
2
Dimension drawing of the Safe Brake Adapter (data in mm)
Safety Integrated
Function Manual, 07/2016, A5E03264275A