Power Allocation System; Set The Summation Date Of The Power Allocation Data (Automatic Meter-Reading) - Toshiba BMS-CT1280E Owner's Manual

Touch Screen Controller

Power Allocation System

In order to perform power allocation, it is necessary to sum the data for power allocation. Summing may be done by automatic
meter-reading or manual meter-reading.

Set the summation date of the power allocation data (Automatic Meter-Reading)

You can set the date for automatic meter-reading of the power allocation data. Automatic meter-reading is carried out on the
set date, and data from the previous meter-reading date to the set date is output as a monthly report file.
It can be set according to the convenience of the building owner or tenant. For example, it is possible to sum over a period as
follows.
• Sum to the end of the month each month (Set the automatic meter-reading day to the end of the month and sum from the
1st to the end of the month)
• Sum to the 15th of every month (Set the 15th of the month as the automatic meter-reading day and sum from the 16th of
the previous month to the 15th of the current month)
• Sum by dividing each month into two (Set the 15th of the month and the end of the month as the automatic meter-reading
days and sum twice, from the 1st to the 15th and from the 16th to the end of the month)
• Sum two months (Set the end of every other month as the meter-reading day and sum from the 1st of the preceding month
to the end of the current month)
By setting automatic meter-reading, you can use the system for monthly electricity billing.
1 1
-(2) -(2)
1 1
-(1) -(1)
2 2
-EN
68
2 2
-(1) -(1)
3 3
-(1) -(1)
-(1) -(1)
3 3
-(1) -(1)
1
1 1
Tap [ -(2)] with [
2
Select the day you want to meter-read on the calendar and
2
tap [ -(1)]
● NOTE
• You can set the schedule for one year from the current month.
• You can set up to two days for every month. Months without meter-reading
can also be set.
• Tap the selected day again to release the setting.
• The meter-reading result file (monthly report/daily report file) can be output
to a USB memory stick. (P.57)
 To batch set meter-reading days
1
Tap
2
Tap a number, enter the date, then tap [
3
3
Tap [ -(1)]
-(1)] (P.53)
2
Owner's Manual
-(1)]