Self-Check During System Initialization (Power Up) - Toshiba V Series User Manual

(1) Self-check during system initialization (power up)

Check item
Peripheral LSI
check
LP check
PCI check
Flash ROM
User program
memory
User data
memory
User data
memory parity
error
Memory data
erasion
Battery level
CPU type error
(for S2PU82
only)
Calendar error
Flash ROM
write warning
6F8C0836
Table 6-3 Self-check during system initialization (power up)
Operation when error is
Self-check
Checks that Starts in ERROR mode
peripheral LSIs were after error entry
initialized normally.
Checks that LP (line Starts in ERROR mode
processor) was after error entry
initialized normally.
Checks that the Starts in ERROR mode
station bus was after error entry
initialized normally
(read-back check).
Checks validity of the Starts in ERROR mode
flash ROM with BCC. after error entry
Checks validity of the Starts in ERROR mode
user program with after error entry
BCC.
Checks user data Starts in ERROR mode
memory by read- after error entry
back.
Reads user data ROM mode: Starts
memory to check after error entry and
parity error. memory clear.
RAM mode: Stops
operation after error
entry
Checks that a fixed ROM mode: Starts
value written in a after error entry and
fixed address can be memory clear.
read. RAM mode: Stops
operation after FLT
LED only blinks
Checks voltage drop Attention
of the battery in the
CPU.
Checks the CPU Starts in ERROR mode
type. after error entry
Checks validity of Light failure.
data (date and time) Continues operation.
read from the
calendar LSI.
Checks if writes in Light failure.
the flash ROM Continues operation.
exceeds 99000
times.
Operator action
detected
Replace the CPU module and
restart the system.
Or contact a Toshiba agent.
Replace the CPU module and
restart the system.
Or contact a Toshiba agent.
Replace the CPU module and
restart the system.
Or contact a Toshiba agent.
Replace the CPU module and
restart the system.
Or contact a Toshiba agent.
Replace the CPU module and
restart the system.
Or contact a Toshiba agent.
Replace the CPU module and
restart the system.
Or contact a Toshiba agent.
When the module has been
left unused without battery
mounted, clear memory and
download programs. In other
case, replace the CPU module
and restart the system. Or
contact a Toshiba agent.
When the module has been
left unused without battery
mounted, clear memory and
download programs. In other
case, replace the CPU module
and restart the system. Or
contact a Toshiba agent.
Replace the battery.
Replace the CPU module and
restart the system.
Or contact a Toshiba agent.
Set time using the tool.
Strong possibility of
subsequent write errors in the
flash ROM. Replace the CPU
module.
6.8 RAS Function
6
173