(5) Push the module slowly and
vertically,
supporting the top/bottom by
hands until it clicks into the
base.
(6) Mount the module securely,
using the attached module
mounting screw of M4 size.
(Screws torque: approx.
1.47N•m=15kgf•cm)
(7) Remove the cover of modules or open the cover of terminal blocks.
Refer to 4.3.2 Installing/removing of the module cover for details.
(8) Wire and connect cables with terminal blocks or connectors.
Use crimp-style terminals with sheaths.
(9) Check the wiring and confirm if the terminal blocks are secured. Then mount the
cover of modules and close the cover of terminal blocks.
6F8C0836
4.3 Mounting the Modules
137
4