Status Display Leds - Toshiba V Series User Manual

Chapter 1 System Configuration
1.4.2

Status display LEDs

1
24
The operation status of the S2 CPU module is indicated by these LEDs.
Name Display
RUN (Green) Lit
Blink
Out
FLT (Red) Lit
Out
BAT (Green) Lit
Out
Set the switches of the S2 main unit and I/O modules according to the specified setup methods
and settings.
Settings out of specification ranges might cause malfunction or system accident.
Table 1-15 Status display LEDs
States
Operating state (RUN Mode)
HOLD Mode
Stopped state (HALT Mode) or Error Mode
CPU abnormal or I/O abnormal
Normal
Battery normal
Battery abnormal or no battery
Caution
model 2000 Sequence Controller S2 User's Manual -Basic Hardware-
Remark