Items Supplied; Interchangeable Plates; Removing Interchangeable Plates; Inserting Interchangeable Plates - Silvercrest SWEW 750 B2 Operating Instructions Manual

__RP102825_B6.book Seite 6 Donnerstag, 23. Oktober 2014 1:47 13

4. Items supplied

1 waffle iron
2 interchangeable plates for waffles|7a
(inserted)
2 interchangeable plates for waffle
nuts|7b,|7c
2 interchangeable plates for shaped waf-
fles|7d,|7e
1 operating instructions
Unpacking
1. Remove all parts from the packaging.
2. Check that all parts are present and in-
tact.
5. Interchangeable
plates
With this waffle iron you can prepare three
different types of waffle:
- Waffles (Belgian style) using inter-
changeable plates|7a
- Waffle nuts (for filling) using inter-
changeable plates|7b,|7c
- Shaped waffles (for filling) using inter-
changeable plates|7d,|7e
To prepare the different types you can swap
the interchangeable plates|7.
DANGER! Risk of electric
shock!
Pull the mains plug out of the wall
socket, before removing or inserting
the interchangeable plates.
DANGER! Risk of injury
through burning! Wait for the
device to cool down before remov-
ing the interchangeable plates.
WARNING! Risk of material dam-
age! Only use the interchangeable plates in
matching pairs, never combine different in-
terchangeable plates with one another.
6
GB
5.1 Removing

interchangeable plates

1. Undo the device lock|3 and open the
device.
2. Figure A: slide the upper release but-
ton|6 in the direction of the arrow and
at the same time slightly tilt the upper
part|8, so that you can remove the up-
per interchangeable plate (7a,|7b
or|7d).
3. Slide the lower release button|6 in the
direction of the arrow and at the same
time lift the lower interchangeable
plate (7a,|7c or|7e) out of the device.
5.2 Inserting
interchangeable plates
1. Undo the device lock|3 and open the
device.
Lower interchangeable plate:
NOTE: the lower interchangeable plates for
waffle nuts|7c and shaped waffles|7e are
the ones with depressions for the batter.
2. Insert the lower interchangeable plate
(7a,|7c or|7e) with the large catch-
es|10 in the back of the holders.
3. Press the lower interchangeable plate
(7a,|7c or|7e) down, so that the small
catches|9 at the front lock into place.
Upper interchangeable plate:
4. Insert the upper interchangeable plate
(7a,|7b or|7d) with the large catch-
es|10 in the bottom of the holders.
5. Press the upper interchangeable plate
(7a,|7b or|7d) against the upper part
of the device, so that the small catch-
es|9 at the top lock into place.