Huawei USG6000 Series Hardware Manual page 126

HUAWEI USG6000 Series
Hardware Guide
Name
Slot numbering
Fixed interface
board
Expansion slot
ESD jack
Fixed interface board
Figure 2-55
Issue 08 (2017-06-30)
Description
Identifies the slot type and number, with 0 indicating the slot for the
out-of-band MGMT port (GigabitEthernet 0/0/0), 1 the slot for the
interface board, and 2 and 3 the WSIC slots.
Interfaces are numbered in the format of "interface type A/B/C", where:
l A is the slot number of the interface card.
l B is the daughter card number, which is 0 because no daughter card
is installed now.
l C is the interface number, which begins with 0 and is numbered
from bottom to top and left to right.
The core component for system control and management. The interface
board provides an out-of-band management port, console port, and USB
port for management access. The interface board is built-in and cannot
be removed. For details on the ports and indicators on the fixed
interface board, see
Provides two WSIC slots.
The equipment end of the wrist strap is inserted into the ESD jack. For
the wrist strap to be effective, ensure that the device is already
grounded.
illustrates the fixed interface board panel of the USG6507/6530.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Fixed interface board.
2 Hardware Overview
112