Huawei USG6000 Series Hardware Manual page 41

HUAWEI USG6000 Series
Hardware Guide
Figure 2-15 USG6310S-W rear panel
SOLE
WiFi antenna
connectors
Anti-theft locating hole
Anti-theft mounting hole
Name
WiFi antenna
connector
SN
USB 2.0 port
Micro SD card
slot
Issue 08 (2017-06-30)
1 3
0 2
Secospace USG6000
WiFi 0
XXXXXXXXXXXXXXXXXXXXXXXXXXX
SN
USB2.0 port
Micro SD card slot
Description
Connect to the WiFi antennas to receive or send data in WLAN
network. For details, see
The serial number that uniquely identifies the device. When applying
for a license file, you must provide the SN of the device.
l USB ports allow you to insert USB devices for system software
upgrades. For details on upgrades through USB devices, refer to the
Upgrade Guide delivered with the device.
l USB ports allow you to insert 4G LTE data cards. For details on the
4G LTE data cards, refer to
The micro SD card slot allows you to insert a micro SD card to record
logs and reports in real time. The micro SD card is optional. You can
purchase one (BOM code: 06010308, model: SDSDQAE-064G,
capacity: 64GB, dimensions (H x W x D): 1 mm x 15.00 mm x 11.00
mm) from Huawei if needed.
You are advised to install an anti-theft board delivered with the device
to protect the micro SD card.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
4
Protective ground
terminal
1 3
micro SD
0 2
CONSOLE
10/100/1000M
autosensing
Ethernet Power receptacle
electrical ports
Console port
micro SD
C
A.1.9 WiFi
2.6 4G LTE Data
2 Hardware Overview
7
6
WiFi antenna
connectors
5 7
WiFi 1
RST
4 6
12V ; 2A
RST button
Clip hole
Antenna.
Card.
27