Siemens Sinumerik 840D sl Function Manual page 194

DNC Plant/DNC Cell (FBDN1)
10 Configuration

Command for list request
DlgSendListCmd is the command for requesting a list of NC data files via the
dialog function. The parameter is a string that must be formulated in
accordance with the NC program. It must be in the first line of the NC data file.
Extract from the machine configuration file:
DlgSendListCmd=(SL)

Command for upload
DlgReceiveCmd is the command for responding to a request. The parameter
is a string that must be formulated in accordance with the NC program. Two
programs are sent successively:
Request program
Program to be transferred back
Extract from the machine configuration file:
DlgReceiveCmd=(R)

External dialog interpreter
This parameter contains the name of an optional dialog interpreter. You can
use the external dialog interpreter to carry out project-specific name
conversions. You have to enter the program ID (ProgID) of the dialog
interpreter to be used. It comprises the following elements:
ComponentName.ClassName.
Extract from the machine configuration file:
DlgConverter=DNCDlgI.DNCCntrl

Type of interpretation
You can use this parameter to assign an additional ID for the code conversion
type to the external dialog interpreter.
Extract from machine configuration file:
DlgSubNumber=0
FBDN1/10-186
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07