Fig. 10-35: Screen Editor - Coordinates - Siemens Sinumerik 840D sl Function Manual

05.07
Coordinates

Fig. 10-35: Screen Editor - coordinates

In the area shown, you can enter the position and size of the field on the screen for
each field selected in the Field combination field.
Coordinates cross:

x goes from left to right (1 to 350 in pixels)

y goes from top to bottom (1 to 150 in pixels)

The upper left corner of the tab page represents the origin (x = 1; y = 1)
x is the horizontal starting position for the field name.
y is the vertical starting position for the field name and the input/output fields.
x2 (1 to 350 in pixels) is the horizontal starting position for the input/output fields.
The field name appears in front of this (coordinate x). x2 is only relevant for edit
boxes (input fields), output fields (inactive input fields) and combo boxes
(combination fields).
Fig. 10-36: Screen Editor – position of a screen field
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
10 Configuration
FBDN1/10-239