Siemens Sinumerik 840D sl Function Manual page 294

DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
3 Operator interface
Title bar (2)
The title of the respective screen window is displayed in the title bar. The NC data
storage structure of the machine in the DNC archive is also displayed. In the above
example, the data is managed in the DNC archive in the area motors group, of the
group 6 cylinders subgroup and the machining centre machine.
Note
The NC data structure of the machine is performed in the configuration program
(DNC_IFC.INI) on the PCU 50/70 / MMC 103.
Screen contents of DNC IFC SINUMERIK (3)
The contents consist of a source and target area. The data management of DNC is
always displayed in the upper part of the screen; depending on the screen, it is the
target or the source.
DNC IFC SINUMERIK has two views of the NC data available in the system:

DNC administration

Data management
The selected NC programs can be downloaded via softkeys.
Further functions can also be selected via softkeys:

Logbook

Filter

Detail view of NC data
Message line (6)
Error and operation messages (e.g. for the download) are displayed in the
message line.
The i icon is on the right to call the online help.
Transfer arrow (7)
A direction arrow is displayed at the interface between the upper and the lower
screen areas which indicates the direction for the transfer of the NC data.
Quick filter bar (8)
The quick filter function allows you to change a filter value without having to call up
the filter selection.
Once you have selected a filter, the first filter condition of the current filter is
displayed in three fields in the toolbar area. The first two fields contain the field
name and operand, while the third field, which can be edited, contains the current
filter condition value.
FBDN2/3-12
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07