CHANnel Subsystem
ECL
ECL
Command
:CHANnel<N>:ECL
The ECL command sets the vertical range, offset, and trigger levels for the
selected input channel for optimum viewing of ECL signals. The set ECL:
values are:
Range: 2.0 V (500 mV per division)
Offset: -1.3 V
Trigger level: -1.3 V
An integer from 1 through the number of channels in the oscilloscope
<N>
connected as one unit (maximum of 8 channels), otherwise the maximum
number of channels is 2.
Example
OUTPUT XXX;":CHANNEL1:ECL"
To return to "Preset User", change the CHANnel:RANGe, CHANnel:OFFSet, or
TRIGger:LEVel value.
4–6