Table of Contents
Advertisement
The Waveform Selection Menu
This chapter shows you how to insert, replace, and delete input
channels on the waveform display, and how to perform waveform
math and overlay functions. Any of these operations can be
performed from any of the oscilloscope menus except calibration.
The dark-blue channel label field to the left of the waveform display
area shows the input channels that are being displayed. To access
the Waveform Selection pop-up menu, you touch the channel label
field twice (once to turn it light-blue then once more to access the
menu). The menu lets you insert, delete, or replace an input channel,
and choose channel modes. It also lets you select to view a waveform
from another module when you are making intermodule
measurements.
The oscilloscope module has the capability to display 96 waveforms −
eight at any one time. When you have made more than eight
waveforms accessible for display, some of them will not be in the
waveform display area. To display them you touch the dark-blue
channel label field once to turn it light blue then use the knob to scroll
through all of the waveforms and select the ones you want displayed.
Waveform Selection Menu Map
The menu map on the next page illustrates all fields and the available
options in the Waveform Selection menu. The menu map will help
you get an overview as well as provide you with a quick reference of
what the Waveform Selection menu contains.
9-2
Advertisement
Table of Contents
