Pioneer HD-V9000 Service Manual page 34

Hd video system
Hide thumbs Also See for HD-V9000:
Table of Contents

Advertisement

1
QQ
3 7 63 1515 0
Error List
A
Category
System error
Playback (video)
(Processes do not start properly.)
Unsupported content error
Abnormal error
(Playback cannot be started.)
B
Playback error
(Playback in progress stops,
or self-reset occurs.)
Setting failure (Setting changes are
not properly reflected.)
Synchronized
Format error of signals for
synchronized playback
playback
C
Abnormal error
Playback
(Playback cannot be started.)
(still picture)
Abnormal error
Playback (telop)
(Playback cannot be started.)
TE
L 13942296513
SD card
No SD card
SD card format error
SD card read error
SD card write error
D
SD card write protection error
USB
No USB device recognized
USB read error
USB write error
USB device with no capacity
E
System
Abnormal internal temperature
Explanation display for abnormal
temperature
EEPROM error
www
Miscellaneous
Failure in firmware updating
F
34
1
http://www.xiaoyu163.com
2
Designation
Communication failure between processes, common
memory access error, memory shortage, hardware fault
Error of a video file out of product warranty (not
mentioned in the operation manual) (filename,
extension, header information, CODEC, etc.)
Error in acquiring file information (time map table)
Error in opening a file (contents, time map table,
various setting files, content-list file, etc.)
Decoder internal error (Decoder [SARADEC] error,
warning interruption, timeout in stream data
transmission)
Abnormal stream (Decoder [SARADEC] error,
warning interruption)
Decoder API error (SARADEC API error)
The setting made by the user is out of specifications.
(Failure in setting the internal synchronization mode,
setting of a disallowed value, failure in resolution switching)
The format of the playback file does not match that of
the input signal of the scaler setting for synchronization.
Synchronization is interrupted.
The specified still-picture file cannot be read or does
not exist.
The text file for the telop cannot be read or does not exist.
Overflow of the buffer for displaying the ticker.
No SD card has been loaded or can be recognized.
Unformatted SD memory card, or one with an
unsupported file format
No file can be read or exists.
Writing prohibited or writing error
The SD card is locked for write protection or has
insufficient capacity remained (less than 100 MB).
No USB device is connected or can be recognized.
Corrupted files, etc.
Writing to the USB device prohibited
No capacity remains in the USB device.
The temperature inside the unit is high
(the ambient temperature is over 45 ºC.)
The unit was automatically set to Standby status
because of abnormal internal temperature.
EEPROM access error (write)
x
ao
Updating the firmware was unsuccessfully terminated
y
(All cases other than "SUCCESS").
.
i
2
http://www.xiaoyu163.com
3
8
Cause
Q Q
3
6 7
1 3
u163
.
HD-V9000
3
4
2 9
9 4
2 8
Display Trigger
Initialization of processes for playback,
start of playback, in playback
Start of playback
Initialization of processes for playback,
start of playback, in playback
Initialization of processes for playback,
start of playback, in playback
Initialization of processes for playback,
start of playback, in playback
Start of playback, in playback
Initialization of processes for playback,
start of playback, in playback
Changing user settings related to
playback
Start of synchronized playback
Start of playback
Start of playback
1 5
0 5
8
2 9
9 4
Power ON (after startup has completed),
access to an SD card (read/write)
Power ON (after startup has completed),
access to an SD card (read/write)
Access to an SD card (read)
Access to an SD card (write)
Access to an SD card (write) in a speed
test
Loading/saving from/to USB memory
Access to USB memory (read)
Reading/storing a file
Access to a USB memory (write)
Reading/storing a file
Saving to USB memory
Abnormal internal temperature occurs.
Entering Standby status because of
abnormal internal temperature.
Power On (from AC-OFF/Standby status) EEPROM ER
m
co
Updating the firmware
4
9 9
LC
SYSTEM ER
UNSUPPOR
VIDEO CON
OPEN FILE
DECODE ER
SETUP PAR
ERROR
UNMATCHE
EXT SYNC S
BITMAP ERR
TEXT FILE E
2 8
9 9
NO SD CAR
SD CARD
FORMAT ER
SD CARD
READ ERRO
SD CARD
WRITE ERR
WRITE PRO
FREE SPAC
NO USB ME
USB READ E
USB WRITE
USB NO CA
ALERT ! HIG
INTERNAL T
PLEASE TU
THE POWER
HIGH TEMP
AUTO TURN
UPDATE xxx
FAILURE

Advertisement

Table of Contents
loading

Table of Contents