Update The Head Property Data (Maintenance Mode 68) - Brother MFC-J3520 Service Manual

2.1

Update the head property data (Maintenance mode 68)

Update the head property data, referring to
Head Property Data and Backup/Restoration of Head Calibration Data."
The head property data can also be updated with the service setting tool
(BrUsbSn.exe).
The head property data updating procedure is given below.
(1) Turn the machine ON and switch it to the maintenance mode.
(2) Connect the machine to your PC using a USB cable.
(3) On the PC, run the service setting tool (BrUsbSn.exe) to display the following
window.
(4) In Product Category, select 1 Ink-Model.
(5) Select 2013 Model_2.
(6) In Port on the BrUsbSn screen, select the port number assigned to the Brother
Maintenance USB Printer.
If the port number is unknown, follow steps 1) through 4) below.
1) Click Start | Settings | Printers.
Chapter 5, Section 1.3.25 "Updating of
4-12
Confidential