Brother MFC-J3520 Service Manual page 50

Error Message
Low Temperature
Media Error
Media is Full
No Caller ID
No File
No Ink Cartridge
No Paper Fed
No Response/Busy
Out of Fax Memory
Out of Memory
Paper Jam
Paper tray not
detected
Touchscreen Init.
Failed
Unable to Print
Unable to Scan
Unusable Device
Disconnect device
from front connector
& turn machine off
then
Unusable Device
Please disconnect
USB device
Wrong Ink Color
Wrong Paper
State
Casing internal thermistor detects that
room temperature is too low.
Detect defective in memory card.
Media slot memory is full or there are 999
files or more.
There is no Caller ID information.
There is no file that can be printed in the
memory card or USB flash memory.
Ink cartridge is not set.
Registration sensor detects no recording
paper in the paper tray 1 or lower tray.
Registration sensor detects that papers are
not loaded correctly in the manual feed slot.
The calling station is busy or does not
respond.
Amount of the data stored in the memory
by the Memory Receive function exceeds
the upper limit.
Memory is insufficient.
Registration sensor, switchback sensor,
and paper width sensor detect paper jam.
Some kind of error occurs on the paper
feed motor.
Switchback sensor detects no paper tray 1.
Touch panel initialization failed.
Detects some problem in printing.
Detects some problem in scanning.
Connected USB device might be broken.
USB device which is not compatible with
this machine is connected.
A ink cartridge is set in position not
matching its specified color.
Registration sensor, paper width sensor
detect unspecified papers.
2-16
Error Refer to
Code page:
40 2-33
2-86
(4.10.4)
2A, 2B,
2-27
2C, 2D
2-54
(4.2.1)
13, 15, 18,
2-21, 2-23,
31, 38, 3C,
2-29, 2-30,
82, 84, 87,
2-31, 2-41,
88, 8A, 8C
2-42, 2-43,
2-44
67
2-39
ED
2-52
24 2-25
17, 80, 81 2-22, 2-40,
2-41
Confidential