Connecting Ifp Basic To A Pc - Siemens SIMATIC IFP Basic Series Operating Instructions Manual

3.3.4

Connecting IFP Basic to a PC

Connection diagram
Requirement
Ensure you have the following articles before connecting the IFP Basic.
Note
When VGA port and DP port are connected to two hosts, IFP displays the signals from DP
port.
● VGA/DisplayPort cable
● USB cable (type B to type A)
● Power cable
● PC
Procedure
1. Connect the Flat Panel and the PC using a VGA or DisplayPort
2. Connect the device and the PC with a USB line (type A to type B).
IFP Basic
Operating Instructions, 03/2019, A5E46178354 - AB
line.
Installing and connecting the device
3.3 Connecting the device
35