Electromagnetic Compatibility - Siemens SIMATIC IFP Basic Series Operating Instructions Manual

Technical information
7.5 Technical specifications
Climatic ambient conditions
The following table shows the climatic ambient conditions for operation of the device.
Ambient conditions
Temperature for IFP1200 /
IFP1500 / IFP 1900 Basic:
Temperature for IFP2200
Basic:
Relative humidity
Atmospheric pressure,
operation elevation
Note the information in section "Notes about usage (Page 14)" .
7.5.2.3

Electromagnetic compatibility

Pulse-shaped interference
The following table shows the electromagnetic compatibility of modules with regard to pulse-
shaped interference. This requires the device to meet the specifications and directives for
electrical installation.
Pulse-shaped interference Test voltage
Electrostatic discharge
in accordance with IEC
61000-4-2
Bursts
(high-speed transient
interference)
in accordance with
IEC 61000-4-4
Surge in accordance with
IEC 61000-4-5
Asymmetrical coupling
Symmetrical coupling
62
Permitted range
horizontal mounting
•
0 to 45 °C
Vertical mounting
•
0 to 45 °C
horizontal mounting
•
0 to 40 °C
Vertical mounting
•
0 to 40 °C
10 to 85% at 30 °C, no condensa-
tion
1080 to 689 hPa
Air discharge: ± 8 kV
Contact discharge: ± 4 kV
± 2 kV power supply cable
± 1 kV signal cable, < 30 m
1 kV line-to-line of DC port
2 kV line-to-earth of DC port
± 2 kV power supply cable
DC voltage with protective elements
1 kV power supply cable
DC voltage with protective elements
Comments
Tilt angle max. 45°
Tilt angle max. 45°
Corresponds to an elevation
of -1000 to 3000 m
Operating Instructions, 03/2019, A5E46178354 - AB
Degree of
severity
3
2
3
3
3
IFP Basic