After Use; Cleaning And Care - Silvercrest SDM 1500 D2 Operating Instructions Manual

After use

1) Allow the appliance to cool down .
2) Remove the pad 6 .
3) Remove the water tank 8 from the appliance and empty it .
4) Pull the upper cable hook z out a little and turn it back upwards .
Wind the cable back around the two cable hooks z/i .
Fix the end of the power cable using the cable clip located on the cable .

Cleaning and care

RISK OF ELECTRIC SHOCK!
► Always remove the mains power plug before cleaning the appliance!
WARNING! RISK OF INJURY!
► Allow the appliance to cool down before cleaning it . Risk of burns!
CAUTION! PROPERTY DAMAGE
► When cleaning the surfaces use neither abrasive or chemical cleaners,
nor sharp or scratchy objects .
■ Empty the water tank 8 after every use .
■ After each use, remove the pad 6/o from the steam foot 5 and wash it out .
■ Note the following washing instructions when you wash the pad 6/o in
the washing machine:
■ If necessary, wipe the appliance with a damp cloth . For stubborn soiling use
a mild detergent on the cloth .
■ 30
│ GB │ IE
Wash at max . 60°C
Do not bleach
Do not tumble dry
Do not iron
SDM 1500 D2