Philips ReCare 7.0 T User Manual page 28

The pro les shown in the dot matrix are merely pictures of the whole
pro le and will not change in size when the speed keys are pressed.
When setting up a program you will enter the maximum speed setting
for the peak of the pro le. During the program the speed levels will
change as the pro le progresses. When the up key is pressed to
request more speed the pro le picture will not change, but the speed
will increase. Pressing the speed keys actually change the peak level
of the program not the current segment speed. You may need to
change the peak setting several times by pressing the speed key
before the current segment increases.
Preset programs speed and incline settings
The preset program speed and incline levels are shown in the chart
below. The Speed numbers shown in the chart indicate a percentage
of the top speed of the program.
Prog
SEG Warm up 1
Speed 20 30 40 50 60 60 70 80 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 80 70 60 50 40 30 20
Plateau
Incline 0 0 0 0
Speed 20 30 40 50 60 60 70 80 100 60 60 70
Interval
Incline 0 0 0 0
Programming preset programs
• Select a program then press the enter key to begin customizing the
program settings, or just press the start key to begin the program
with the default settings. All data calculations will use the patient
information from the set up function (set up key at top left of con-
sole).
• After selecting a program, press enter to set the program time. The
Time window will blink with the default value of 30 minutes. You
may use any of the up/down keys to adjust the time. After adjusting
the time, press enter. (Note: You may press start at any time during
the programming to begin with only settings you have modi ed at
that point).
• The speed window will now be blinking, showing the preset top
speed of the selected program. Use the up/down keys to adjust,
and then press enter. Each program has various speed changes
throughout; this allows you to limit the highest speed the program
will attain during your workout.
2 3 4 5 6 7 8 9 10
0 0 0 0 0 0 0 0 0
80 100 60 70 100 60 70 100 60 70
1 2 3 5 6 2 3 5 6
28
11 12 13 14 15 16 17 18 19
0 0 0 0 0 0 0 0 0
7 2 3 7 2 3 8 2 3
20 21 22 23 24 Cool down
0 0 0 0 0 0 0 0
80 70 60 60 50 40 30 20
5 4 3 1 0 0 0 0