Editing Meter Properties - GE DigitalFlow GF868 Programming Manual

C.5 Editing Meter Properties
Through PanaView, you can edit the properties of your GF868. You can:
•
Set the meter clock, or synchronize it with the PC clock
•
Read, plot and save transducer signals
•
Clear totalizers
•
Save site files to the meter or PC
•
Clear sites from the meter
•
Print site files to the PC
To edit the properties of your GF868:
1. Highlight the meter (as shown in Figure 23 on page 104).
2. Open the "Edit" menu and select the "Properties" option, as shown in Figure 25.
DigitalFlow™ GF868 Programming Manual (2-Channel)
Figure 25: Properties Option in the Edit Menu
Appendix C. Programming with PanaView
105