GE DigitalFlow GF868 Programming Manual page 125

C.6 Changing Meter Settings (cont.)
6. To enter a particular option:
a. Highlight and double-click on the desired option in the left pane. Figure 38 shows the first entry (Transducer
Number) in the Pipe parameters option. The title above the center pane lists the current entry, while the center
pane displays the available selections for that entry.
b. Click on the desired choice; if the entry requires a numeric value, change the value displayed in the right pane.
c. Do one of the following:
[Next Item]
Click on
[Previous Item]
Click on
Note: If you click on either
unchanged.
As you step through the menu, the bottom panel lists the current settings you have modified or left unchanged (see
Figure 39 on page 116). If you modify or step through more than five items, a scroll bar at the right of the panel lets you
review the earlier settings.
DigitalFlow™ GF868 Programming Manual (2-Channel)
Figure 38: Pipe Parameters Option in Site Edit Menu
to proceed to the next menu item,
or
to return back through the menu to a previous item.
[Next Item] [Previous Item]
or without changing the settings, the current settings remain
Appendix C. Programming with PanaView
115