Measured Value Expander Block Range_Xp; Identification; Application; Setting Guidelines - ABB Relion REC670 Applications Manual

Section 21
Basic IED functions
•
•
•
• ProductVer
•
• IEDMainFunType
•
• SerialNo
• OrderingNo
• ProductionDate
21.3

Measured value expander block RANGE_XP

21.3.1

Identification

Function description
Measured value expander block
21.3.2

Application

The current and voltage measurements functions (CVMMXN, CMMXU, VMMXU and VNMMXU),
current and voltage sequence measurement functions (CMSQI and VMSQI) and IEC 61850
generic communication I/O functions (MVGAPC) are provided with measurement supervision
functionality. All measured values can be supervised with four settable limits, that is low-low
limit, low limit, high limit and high-high limit. The measure value expander block ( RANGE_XP)
has been introduced to be able to translate the integer output signal from the measuring
functions to 5 binary signals, that is below low-low limit, below low limit, normal, above high-
high limit or above high limit. The output signals can be used as conditions in the configurable
logic.
21.3.3

Setting guidelines

There are no settable parameters for the measured value expander block function.
442
Describes the firmware version.
The firmware version can be checked from Main menu/Diagnostics/IED status/
Product identifiers
Firmware version numbers run independently from the release production numbers.
For every release number there can be one or more firmware versions depending on
the small issues corrected in between releases.
Describes the product version. Example:
1 is the Major version of the manufactured product this means, new platform of the product
2 is the Minor version of the manufactured product this means, new functions or new hardware
added to the product
3 is the Major revision of the manufactured product this means, functions or hardware is either
changed or enhanced in the product
Main function type code according to IEC 60870-5-103. Example: 128 (meaning line
protection).
2.1.0
IEC 61850 IEC 60617
identification identification
RANGE_XP -
1MRK 511 358-UEN A
SEMOD52451-1 v2
SEMOD113212-2 v3
ANSI/IEEE C37.2
device number
-
SEMOD52434-4 v5
SEMOD113223-4 v1
Application manual