Dnp3 Communication Protocol; Application - ABB Relion REC670 Applications Manual

Section 18
Station communication
REB 207 Private range
REG 150 Private range
REQ 245 Private range
RES 118 Private range
Refer to the tables in the Technical reference manual /Station communication, specifying the
information types supported by the communication protocol IEC 60870-5-103.
To support the information, corresponding functions must be included in the protection IED.
There is no representation for the following parts:
• Generating events for test mode
• Cause of transmission: Info no 11, Local operation
Glass or plastic fiber should be used. BFOC/2.5 is the recommended interface to use
(BFOC/2.5 is the same as ST connectors). ST connectors are used with the optical power as
specified in standard.
For more information, refer to IEC standard IEC 60870-5-103.
18.7

DNP3 Communication protocol

18.7.1

Application

For more information on the application and setting guidelines for the DNP3 communication
protocol refer to the DNP3 Communication protocol manual.
430
1MRK 511 358-UEN A
GUID-EF1F0C38-9FF6-4683-8B10-AAA372D42185 v1
Application manual