Siemens SINAMICS G120 Operating Instructions Manual page 149

5. Press the "Start" button.
6. Wait until the inverter has been reset to the factory setting.
You have reset the inverter to factory settings.
Procedure with the BOP-2 operator panel
Proceed as follows to reset the inverter to factory settings:
1. In the "Options" menu, select the "DRVRESET" entry
2. Confirm the reset using the OK key.
3. Wait until the inverter has been reset to the factory setting.
You have reset the inverter to factory settings.
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
Commissioning
5.5 Restoring the factory setting
149