Guide Through The Manual - Siemens SINAMICS G120 Operating Instructions Manual

Introduction

2.2 Guide through the manual

2.2 Guide through the manual
Section
Description (Page 25)
Installing (Page 47)
Commissioning (Page 115)
Advanced commissioning
(Page 151)
Backing up data and series
commissioning (Page 309)
Corrective maintenance
(Page 331)
Alarms, faults and system
messages (Page 347)
22
In this section you will find answers to the following questions:
How is the inverter marked?
•
What components make up the inverter?
•
What optional components are available for the inverter?
•
What is the purpose of the optional components?
•
Which motors can be fed from the inverter?
•
What commissioning tools are there?
•
Which sequence is recommended when installing the inverter?
•
What does EMC-compliant installation actually mean?
•
What options are available to install optional components below the inverter?
•
What are the inverter dimensions?
•
What mounting and installation materials are required when installing the inverter?
•
To which line supplies can the inverter be connected?
•
How is the inverter connected to the line supply?
•
How is the braking resistor connected to the inverter?
•
Which terminals and fieldbus interfaces does the inverter have?
•
What are the interface functions?
•
Which motor data are required for commissioning
•
How is the inverter set in the factory?
•
What is the commissioning procedure?
•
How do you restore the inverter factory settings?
•
Which functions are included in the inverter hardware?
•
How do the functions interoperate with one another?
•
How are the functions set?
•
Why is it necessary to back up the inverter settings?
•
What options are available to back up the settings?
•
How does the data backup function?
•
How do you prevent the inverter settings from being changed?
•
How do you prevent the inverter settings from being read out?
•
How do you replace inverter components?
•
How do you change the firmware version of the inverter?
•
What is the meaning of the LEDs provided on the inverter?
•
How does the system runtime you respond?
•
How does the inverter save alarms and faults?
•
What do the inverter alarms and faults mean?
•
How are inverter faults resolved?
•
Which I&M data are saved in the inverter?
•
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB