Communication Level; Communication - ABB ControlMaster CM10 Manual

ControlMaster CM10, CM15, CM30, CM50, CMF160 and CMF310
Universal process controllers and indicator,

4 Communication Level

4.1 Communication

The Communication parameters are accessed from the Advanced access level – refer to the User Guide supplied with your
instrument for access details.
Note. Communication parameters are displayed for the type of communication board fitted in the instrument, for example,
if a MODBUS board is fitted, MODBUS parameters are enabled, but Ethernet parameters are not enabled or displayed.
Used to setup communications parameters for the MODBUS / Ethernet / email communication
Menu
Communication
protocols.
MODBUS
Device Address
Reverse IEEE Data
8
1
/ ,
8
Refer to Section 5, page 13 for details of MODBUS coils and registers.
The unique network address assigned to this device (1 to 247) that allows the host system to
identify the instrument on a MODBUS link.
All analog data is read from the instrument in IEEE (Institute of Electronics and Electrical Engineers)
format contained in adjacent registers representing the data in high word / low word order.
Select Yes to reverse the IEEE data order, otherwise select No.
1 1
/ , / DIN and fieldmount
4 2
4 Communication Level
IM/CM/C–EN Rev. H