Hand Warming Function; Storage When Not In Use - Silvercrest SPBH 5.200 A1 Operating Instructions And Safety Instructions

Hand warming function

 To enable the hand warming function, press and hold the
Mode selection button (1) for approx. 3 seconds. The Mode
LED (4) lights orange. The other three LEDs (4) indicate the
heating level. You can press the Mode selection button (1) to
cyclically toggle between the heating levels.
LED indicators (4)
One LED lighting blue
Two LEDs lighting blue
Three LEDs lighting blue
 To switch the hand warming function off, press and hold the
Mode selection button (1) for approx. 3 seconds.
Please note that it is not possible to use the hand
warming function and the power bank mode at the
same time.

Storage when not in use

When not using the power bank for a long time, it is
recommended to recharge it from time to time. This
ensures a longer battery endurance.
Store the device in a dry, cool place.
SilverCrest SPBH 5.200 A1
Heat setting
I (36°C to 40°C)
II (41°C to 45°C)
III (46°C to 50°C)
English - 15