SilverCrest SPBH 5.200 A1
Before you start
Remove the power bank and its accessories from the package
and remove all packaging material. Check the packaging for
any missing contents. Please contact Customer Service
immediately if any items are missing or defective.
Getting started
WARNING! The power bank must never be
charged and be used to recharge an external
device at the same time.
Charging the power bank
WARNING! Because of its high input current,
never use a notebook or PC to charge the power
bank, only use a suitable power adapter (5V
min. 2.1A, not supplied).
To charge the built-in battery of your power bank, use the
supplied USB charging cable (B) to connect the power bank to
a suitable USB power adapter (not supplied). To do so, insert
the Micro USB plug of the USB charging cable (B) into the
power bank Micro USB port (3) and then connect the USB
plug to the USB port of the power adapter. During the
charging process, the LEDs (4) inform you about the current
state of charge of the power bank. The Mode LED (4) stays off.
12 - English
,