Checking The State Of Charge - Silvercrest SPBH 5.200 A1 Operating Instructions And Safety Instructions

LED indicators (4)
One LED flashes
One LED on, one LED flashes
Two LEDs on, one LED flashing
Three LEDs on
Alternatively, you can charge the power bank
battery with the USB power adapter of your mobile
device
specifications: 5V

Checking the state of charge

You can also check the state of charge of your power bank
when it is not being charged or discharged. To do this, press
the Mode selection pushbutton (1) briefly. The LEDs (4) will
indicate the state of charge of the power bank for approx.
15 seconds.
Please note that the LED indicator only shows an approximate
value of the state of charge of your power bank. During this,
the Mode LED (4) lights green (or flashes green when the
battery is empty).
LED indicators (4)
Three LEDs lighting blue
Two LEDs lighting blue
One LED lighting blue
Mode LED flashing green
if its output
, min. 2.1A.
SilverCrest SPBH 5.200 A1
State of charge
0 - 33%
34 - 66%
67 - 99%
100%
meets
State of charge
67 - 100%
34 - 66%
1 - 33%
0%
the following
English - 13