After Deep-Frying; Changing The Cooking Oil Or Fat - Silvercrest SKF 2800 B3 Operating Instructions Manual

After deep-frying

1) When the food is ready, pull the handle upwards until the latch handle e
engages .
2) Leave the frying basket 3 in this position to drip off .
3) Press the On/Off switch q . The deep fat fryer is now switched off . Remove
the power plug from the mains power socket .
4) When the fried food has dripped off, open the appliance lid r by pressing
the handle locking button 6 .
WARNING! RISK OF INJURY!
► Never touch the frying basket 3 directly after deep frying . It will be extremely
hot! Only lift the frying basket 3 out of the deep fat fryer using the handle!
5) Lift the frying basket 3 carefully out of the deep fat fryer . If necessary, shake
off excess oil or grease over the fryer .
6) Tip the fried food into a bowl or a sieve (lined with absorbent kitchen paper!) .
If you do not use the deep fat fryer regularly, it is advisable to store the cooled
oil in well-sealed bottles or other containers in the refrigerator or a similar cool
storage location . Fill the bottles through a fine sieve in order to remove any food
particles from the oil .

Changing the cooking oil or fat

Do not change the oil until it has completely cooled down . Solid fats must still be
in a slightly liquid state so that they can be poured .
1) Open the appliance lid r .
2) Remove the frying basket 3 .
3) Remove the control and heating element 5 .
4) Place the control and heating element 5 in a clean and dry location .
5) Carefully remove the stainless steel container 4 with the oil or fat from the
deep fat fryer .
6) Pour the oil or fat into suitable containers, for example bottles .
Use the pouring runnel at the corner of the stainless steel container 4 .
NOTE
The disposal of cooking oils and fats is regulated differently in every com-
munity or town . Disposal of such oils or fats in the normal household refuse is
often prohibited . Make enquiries at your local community administration office
about suitable disposal sites .
■ 14 │ GB │ IE │ NI │ CY
SKF 2800 B3